Excerpt:
Patterned stainless sheet for architectural cladding, lift interiors, equipment covers and decorative fabrication. An embossed texture creates visual depth and can make minor handling marks less conspicuous. Match the pattern, direction, gloss and base-metal specification to an approved sample before ordering panels for one visible installation.
QIDA METAL · MATERIALS & EXPORT SUPPLY
304 Stainless Steel Decorative Embossed Sheet
Patterned stainless sheet for architectural cladding, lift interiors, equipment covers and decorative fabrication. An embossed texture creates visual depth and can make minor handling marks less conspicuous. Match the pattern, direction, gloss and base-metal specification to an approved sample before ordering panels for one visible installation.
| Ordering item | Specification |
|---|---|
| Material / standard | ASTM A240/A240M base sheet; embossed finish to approved sample |
| Product family | Steel Plates |
| Supply basis | Enquiry-based grade, dimensions, processing and quantity; availability, MOQ and delivery confirmed in the quotation. |
| Inspection documents | Request heat/batch records and EN 10204 3.1 or other documents where required; actual document scope must be confirmed. |
01 / Selection Advantages
- Combine a specified stainless base grade with a repeatable appearance approval process.
- Cut-to-size panels and protective-film choices can reduce unnecessary surface handling.
- Pattern direction and panel sequence can be marked to help the installer maintain a consistent finish.
02 / Specifications & Size Schedule
Use the following options to prepare a complete enquiry. The lists do not imply that every dimension combination is stocked or interchangeable with another standard. State the required tolerances and quantity for each line.
| Parameter | Enquiry requirement |
|---|---|
| Base thickness / mm | 0.5, 0.6, 0.8, 1.0, 1.2, 1.5, 2.0 |
| Width / mm | 1000, 1219, 1250, 1500 enquiry sizes |
| Length / mm | 2000, 2438, 2500, 3000 or cut-to-size |
| Appearance | Texture, gloss, pattern pitch and direction from approved sample |
| Protection | Film type, film direction and removal/storage conditions to be agreed |
| Panel enquiry / mm | Base thickness choices / mm | Acceptance detail |
|---|---|---|
| 1000 × 2000 | 0.5, 0.6, 0.8, 1.0, 1.2 | Sample and diagonal/flatness check |
| 1219 × 2438 | 0.6, 0.8, 1.0, 1.2, 1.5 | Agree pattern orientation |
| 1250 × 2500 | 0.8, 1.0, 1.2, 1.5 | State edge and protective film |
| 1500 × 3000 | 1.0, 1.2, 1.5, 2.0 | Confirm forming and packing support |
03 / Chemical Composition
Composition is expressed in weight percent. Maximum and minimum limits refer to the listed grade/product reference; final acceptance follows the agreed standard edition and heat analysis.
| Element | Grade reference / wt.% |
|---|---|
| C | ≤0.07 |
| Mn | ≤2.00 |
| P | ≤0.045 |
| S | ≤0.030 |
| Si | ≤0.75 |
| Cr | 17.5–19.5 |
| Ni | 8.0–10.5 |
| N | ≤0.10 |
| Fe | Balance |
The table follows ATI’s published 304 flat-product composition reference. It must not be substituted for a different product form or standard edition.
04 / Mechanical Properties & Technical Notes
| Base sheet condition | Min tensile / MPa | Min proof / MPa | Elongation / hardness |
|---|---|---|---|
| Annealed 304 flat-stock reference | 515 | 205 | ≥40%; ≤92 HRB |
Base thickness excludes the raised pattern height. Mechanical values describe the flat base stock, not a tested embossed panel assembly. Textured sheet is not automatically a certified slip-resistant floor product. Agree bending direction and trial forming for visible corners.
05 / Processing & Inspection
| Control point | What to agree or inspect |
|---|---|
| Sample approval | Record pattern, colour/finish and viewing direction under agreed lighting. |
| Base material | Check heat analysis and nominal base thickness before surface processing. |
| Panel checks | Inspect scratches, flatness, pattern continuity, protective film and cut edges. |
| Fabrication planning | Review bend radius, relief cuts and film compatibility with cutting/handling. |
Include additional tests, third-party inspection, marking transfer and processing requirements before order confirmation. Qida can coordinate the agreed inspection scope and supporting records; an online product guide is not a delivered-batch test certificate.
06 / Export Packaging & Transport
| Packing item | Practical requirement |
|---|---|
| Face separation | Interleave protected faces and keep grit out of the stack. |
| Edge protection | Protect corners and film edges against straps and loading contact. |
| Flat packing | Use a supported flat pallet/crate and label appearance-critical faces. |
| Installation labels | Identify sheet dimensions, pattern direction and panel numbers. |
Agree destination port, Incoterms rule and named place, package mass, unloading equipment and required shipping documents. Container capacity depends on payload limits, route and load distribution. For regulated solid-wood packaging, confirm the applicable ISPM 15 treatment and marking requirements.
07 / Qida Procurement Support
| Order stage | Our coordination | Buyer benefit |
|---|---|---|
| Specification review | Review material, dimensions, units, drawings and destination requirements. | A clear line-by-line enquiry helps reduce omissions and incompatible substitutions. |
| Processing plan | Confirm cutting, finishing, inspection and identification items in writing. | The buyer can assess scope and acceptance before production or sourcing proceeds. |
| Packing & dispatch | Coordinate labels, packing list, suitable protection and shipping-document requirements. | Piece count and heat/lot correspondence can be checked at agreed milestones. |
| After-sales follow-up | Review order references, arrival photos and inspection records for reported issues. | A documented issue description supports a specific response and follow-up. |
08 / Request a Detailed Quotation
Send the standard and edition, grade, size schedule, quantity per size, material condition, finish, processing drawings, tests/documents, packing requirements and destination port. Include maximum piece or package weight and any project approval requirements. Pricing, minimum quantity and lead time will be confirmed against the actual requirement.
Shandong Qida Metal Technology Co., Ltd. · Liaocheng, Shandong, China
qidamt@163.com · +86 139 6951 8618
Technical References
The primary references below support material selection and enquiry preparation. They do not certify a delivery batch or imply an affiliation with their publishers. Product form, condition, standard edition and supplementary requirements must be agreed in the purchase specification.
