Excerpt:
For corrosion-resistant machined parts, connectors and welded fabrication. Low-carbon 304L supports post-weld corrosion requirements. Confirm product form, annealed / cold-worked condition and dimensional tolerance together.
QIDA METAL · PRODUCT PROCUREMENT GUIDE
304L Stainless Steel Round Bar
For corrosion-resistant machined parts, connectors and welded fabrication. Low-carbon 304L supports post-weld corrosion requirements. Confirm product form, annealed / cold-worked condition and dimensional tolerance together.
| Procurement Item | Details |
|---|---|
| Applicable Standard | ASTM A276/A276M / 304L (bars and shapes) |
| Product Category | Steel Sections & Bars / Round Bar |
| Dimensions & Quantity | The sizes below are enquiry references. Available combinations, quantities and delivery times are subject to written quotation. |
| Documentation | Specify heat/batch inspection documents, standard edition, traceability and project certification in your enquiry. Documents are subject to confirmation of actual availability. |
01 / Product Features & Selection
- Verify chemistry to the bar standard rather than TP304L pipe limits.
- Quote hot rolled, peeled / turned and ground surfaces separately to define machining allowance and finish.
- Match size, heat number and inspection documents for component-batch traceability.
02 / Specifications, Dimensions & Ordering Options
These dimensions help define your purchase requirement; they do not imply that every combination is in stock. Specify tolerances, quantity, delivery condition and destination port. Submit drawings for special sizes.
| Parameter | Specification / Enquiry Range | Points to Confirm |
|---|---|---|
| Diameter d / mm | 10, 12, 14, 16, 18, 20, 22, 25, 28, 30, 32, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 90, 100, 110, 120, 130, 140, 150, 160, 180, 200, 220, 250 | Enquiry diameter series; confirm diameter combinations with heat-treatment and surface condition. |
| Length / m | 3, 6 or sawn fixed lengths | For short pieces, specify saw cut, tolerance and machining allowance. |
| Dimensions & Surface | Hot rolled, turned, ground or cold-drawn requirements | Use the appropriate dimensional tolerance standard for hot rolled and bright finished bars. |
| Ordering Tolerances | Diameter tolerance, ovality, straightness and surface-defect depth | Precision fits require explicit tolerances. |
| Material Condition | Annealed; confirm cold-worked properties separately | Annealed values do not represent all cold-drawn hard conditions. |
| Surface / Precision | Turned, ground or cold drawn; specify the applicable standard and diameter range for h9 / h11 requirements. | For high precision, confirm roundness, straightness and surface roughness. |
Round Bar Theoretical Weight & Shipping Estimates
Using a typical density of 7.90 g/cm³: theoretical mass per metre = π÷4×d²×7.90÷1000, with d in mm. Values support procurement estimates; actual weighing, diameter tolerances, peeling and cut-length losses follow the agreed settlement basis.
| Diameter d / mm | Theoretical kg/m | Theoretical kg / 6 m Bar |
|---|---|---|
| 10 | 0.62 | 3.72 |
| 12 | 0.89 | 5.36 |
| 16 | 1.59 | 9.53 |
| 20 | 2.48 | 14.89 |
| 25 | 3.88 | 23.27 |
| 30 | 5.58 | 33.51 |
| 40 | 9.93 | 59.56 |
| 50 | 15.51 | 93.07 |
| 60 | 22.34 | 134.02 |
| 80 | 39.71 | 238.26 |
| 100 | 62.05 | 372.28 |
| 120 | 89.35 | 536.08 |
| 150 | 139.60 | 837.63 |
| 180 | 201.03 | 1206.18 |
| 200 | 248.19 | 1489.11 |
| 250 | 387.79 | 2326.74 |
03 / Standard Chemical Composition
ASTM A276/A276M / 304L (bars and shapes). Values are mass percentages (%). Maximum limits are shown by ≤, minimum limits by ≥; ranges are specification limits and Fe is the balance. These are not measured results for a current delivery heat.
| Element / Indicator | Requirement or Range |
|---|---|
| C | ≤0.030 |
| Si | ≤1.00 |
| Mn | ≤2.00 |
| P | ≤0.045 |
| S | ≤0.030 |
| Cr | 18.0–20.0 |
| Ni | 8.0–12.0 |
| Fe | Balance |
Common A276 304L bar / shape composition, mass %. Confirm product standards separately for laser-welded, hot rolled and cold-drawn routes. Do not substitute A240 plate or A312 pipe chemistry.
04 / Mechanical Properties & Application Limits
| Thickness / Material Condition | Yield Strength Re / Rp0.2 (MPa) | Tensile Strength Rm (MPa) | Elongation After Fracture A (%) |
|---|---|---|---|
| Annealed reference; confirm dimensions and specimens | Rp0.2 ≥170 | ≥485 | ≥40 |
Strength in MPa, A in %. Accept cold-worked and built-up shapes against the actual product standard. Annealed round-bar data does not establish the structural capacity of a welded assembly.
05 / Inspection, Processing & Quality Checks
- Check ASTM A276 / A484, 304L heat number and delivery condition. Pressure-service components require separate review of A479 or other applicable standards.
- PMI supports alloy identification; verify low carbon by a suitable carbon-analysis method.
- Account for work hardening during machining; allow skin removal for hot rolled surfaces.
- Separate stainless steel from carbon-steel swarf and straps to prevent iron contamination and visible scratches.
06 / Export Packaging for This Product
| Stage | Recommended Arrangement | Key Considerations |
|---|---|---|
| Section-Separated Bundles | Identify section designation, steel grade, length and heat number separately. | Keep different grades and delivery conditions in separate bundles. |
| Supports & Corner Protection | Protect flanges, leg edges and machined faces; support long sections at multiple points. | Prevent handling twist, local damage and permanent bending. |
| Loading Checks | Plan loading around cut length, bundle weight, forklift points and container-door clearance. | Assess container type and handling arrangements in advance for long or heavy loads. |
Before shipment, cross-check product, grade, heat number, size, piece count, net weight and gross weight against the packing list. Match labels to inspection documents. For solid-wood pallets, dunnage or crates, check destination-country rules; wood subject to ISPM 15 must be treated and marked by an approved provider. Load dry cargo and arrange supports, blocking and securing according to weight and centre of gravity.
07 / How Qida Supports Your Procurement
| Procurement Stage | Qida Coordination | Information for the Buyer |
|---|---|---|
| Requirement Review | Review application, standards, material condition, drawings and acceptance items. | A checkable specification list helps reduce language and unit-conversion errors. |
| Order Confirmation | Confirm material, processing, inspection, packaging, delivery milestones and cost responsibilities item by item. | A clear written quotation and mutually agreed purchase requirements. |
| Delivery Coordination | Coordinate production / sourcing progress, labels, packing lists and shipping documents. | Check dimensions, quantities and heat/batch correspondence at agreed milestones. |
| After-Sales Follow-Up | Review issues using order number, heat number, arrival photographs and test records. | A defined issue description and documented resolution communications. |
Qida focuses on clear specifications, material requirement checks and delivery coordination. Include cutting, cut-to-length, surface treatment, third-party inspection and certificate requirements in your enquiry so that the achievable scope can be agreed before order placement.
08 / Request for Quotation
For an accurate quotation, please provide:
A276 / 304L edition + d×L / quantity + annealed or cold-worked condition + diameter tolerance / roughness + UT / documents + destination port. Include drawings and inspection plans.
Define Specifications, Quality and Delivery in One Enquiry
Send your purchasing list to Shandong Qida Metal Technology Co., Ltd. We will review standards, dimensions and destination requirements with you.
Send an Enquiry · qidamt@163.com
139-6951-8618
Technical Sources & Ordering Notes
This selection and enquiry guide is compiled from the primary public sources below. Values are not an inspection certificate for a delivery batch and do not imply a supply or authorization relationship with the source publishers. The agreed order governs standard edition, product form, thickness range, specimen and delivery condition. Similar grades are not automatically equivalent. Confirm project certification and inspection documents before ordering.
