Excerpt:
Hot rolled equal angles for supports, connections, equipment frames and structural fabrication. Equal legs simplify scheduling and positioning. Load capacity still requires checks of section, holes and connections.
QIDA METAL · PRODUCT PROCUREMENT GUIDE
European Equal Leg Angle
Hot rolled equal angles for supports, connections, equipment frames and structural fabrication. Equal legs simplify scheduling and positioning. Load capacity still requires checks of section, holes and connections.
| Procurement Item | Details |
|---|---|
| Applicable Standard | EN 10025-2:2019 / S235JR (hot rolled sections) |
| Product Category | Steel Sections & Bars / Angles |
| Dimensions & Quantity | The sizes below are enquiry references. Available combinations, quantities and delivery times are subject to written quotation. |
| Documentation | Specify heat/batch inspection documents, standard edition, traceability and project certification in your enquiry. Documents are subject to confirmation of actual availability. |
01 / Product Features & Selection
- Specify a×a×t for leg width and thickness to avoid trade-size differences between standards.
- Check rolled radii, leg ends and thickness together for fit, drilling and bolting.
- Fixed-length and matched cutting lists can reduce site offcuts and short-piece handling.
02 / Specifications, Dimensions & Ordering Options
These dimensions help define your purchase requirement; they do not imply that every combination is in stock. Specify tolerances, quantity, delivery condition and destination port. Submit drawings for special sizes.
| Parameter | Specification / Enquiry Range | Points to Confirm |
|---|---|---|
| Leg Width a / mm | 20, 25, 30, 35, 40, 45, 50, 60, 63, 65, 70, 75, 80, 90, 100, 120, 125, 150, 160, 180, 200 | Regional series differ; confirm applicable EN 10056 sizes. |
| Thickness t / mm | 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 15, 16, 18, 20 | Every thickness is not available with every leg width. |
| Common Enquiry Combinations / mm | 30×30×3；40×40×4；50×50×5；60×60×6；75×75×6；90×90×8；100×100×10；150×150×12 | Confirm radii and theoretical mass against the complete dimensional series. |
| Dimensions / Tolerances | EN 10056-1 / EN 10056-2 | Leg width, thickness, squareness, straightness and twist |
| Length / m | 6, 9, 12 or drawing-specified lengths | Holes and mitres to fabrication drawings |
| Surface | Hot rolled black steel; galvanizing or painting by enquiry | Confirm chemistry and completed fabrication before finishing. |
03 / Standard Chemical Composition
EN 10025-2:2019 / S235JR (hot rolled sections). Values are mass percentages (%). Maximum limits are shown by ≤, minimum limits by ≥; ranges are specification limits and Fe is the balance. These are not measured results for a current delivery heat.
| Element / Indicator | Requirement or Range |
|---|---|
| C | ≤0.17 (t≤40 mm); ≤0.20 (t>40 mm; above 100 mm by agreement) |
| Mn | ≤1.40 |
| P | ≤0.040 |
| S | ≤0.040 |
| N | ≤0.012 |
| Cu | ≤0.55 |
| Si | Not specified in the standard table |
| CEV | ≤0.35（t≤40 mm）；≤0.38（40<t≤140 mm） |
| Fe | Balance |
ArcelorMittal EN 10025-2:2019 section data, mass %. Confirm nitrogen-binding exceptions, galvanizing suitability and thick-section conditions against the ordered standard.
04 / Mechanical Properties & Application Limits
| Thickness / Material Condition | Yield Strength Re / Rp0.2 (MPa) | Tensile Strength Rm (MPa) | Elongation After Fracture A (%) |
|---|---|---|---|
| 3≤t≤16 mm | ≥235 | 360–510 | ≥26 |
| 16<t≤40 mm | ≥225 | 360–510 | ≥26 |
| 40<t≤63 mm | ≥215 | 360–510 | ≥25 |
| 63<t≤100 mm | ≥215 | 360–510 | ≥24 |
Strength in MPa, proportional elongation A in %. JR impact class is 27 J / +20°C; verify actual testing, specimen size and direction against the standard and purchase requirements. Actual delivery weight may differ from theoretical mass within applicable tolerances.
05 / Inspection, Processing & Quality Checks
- Check grade properties for actual leg thickness; leg width does not define the strength thickness group.
- The angle centroid is offset from leg centrelines. Design must address eccentric connections and single-leg loading.
- Inspect internal / external radii, squareness, straightness and ends; retain heat traceability after drilling.
- Confirm impact, documents and finish for the project. Similar appearance does not make a GB angle equivalent to EN material.
06 / Export Packaging for This Product
| Stage | Recommended Arrangement | Key Considerations |
|---|---|---|
| Section-Separated Bundles | Identify section designation, steel grade, length and heat number separately. | Keep different grades and delivery conditions in separate bundles. |
| Supports & Corner Protection | Protect flanges, leg edges and machined faces; support long sections at multiple points. | Prevent handling twist, local damage and permanent bending. |
| Loading Checks | Plan loading around cut length, bundle weight, forklift points and container-door clearance. | Assess container type and handling arrangements in advance for long or heavy loads. |
Before shipment, cross-check product, grade, heat number, size, piece count, net weight and gross weight against the packing list. Match labels to inspection documents. For solid-wood pallets, dunnage or crates, check destination-country rules; wood subject to ISPM 15 must be treated and marked by an approved provider. Load dry cargo and arrange supports, blocking and securing according to weight and centre of gravity.
07 / How Qida Supports Your Procurement
| Procurement Stage | Qida Coordination | Information for the Buyer |
|---|---|---|
| Requirement Review | Review application, standards, material condition, drawings and acceptance items. | A checkable specification list helps reduce language and unit-conversion errors. |
| Order Confirmation | Confirm material, processing, inspection, packaging, delivery milestones and cost responsibilities item by item. | A clear written quotation and mutually agreed purchase requirements. |
| Delivery Coordination | Coordinate production / sourcing progress, labels, packing lists and shipping documents. | Check dimensions, quantities and heat/batch correspondence at agreed milestones. |
| After-Sales Follow-Up | Review issues using order number, heat number, arrival photographs and test records. | A defined issue description and documented resolution communications. |
Qida focuses on clear specifications, material requirement checks and delivery coordination. Include cutting, cut-to-length, surface treatment, third-party inspection and certificate requirements in your enquiry so that the achievable scope can be agreed before order placement.
08 / Request for Quotation
For an accurate quotation, please provide:
S235JR / EN 10025 edition + EN 10056 a×a×t + length / pieces + hole / mitre drawings + finish + destination port. Include project specifications and inspection plans.
Define Specifications, Quality and Delivery in One Enquiry
Send your purchasing list to Shandong Qida Metal Technology Co., Ltd. We will review standards, dimensions and destination requirements with you.
Send an Enquiry · qidamt@163.com
139-6951-8618
Technical Sources & Ordering Notes
This selection and enquiry guide is compiled from the primary public sources below. Values are not an inspection certificate for a delivery batch and do not imply a supply or authorization relationship with the source publishers. The agreed order governs standard edition, product form, thickness range, specimen and delivery condition. Similar grades are not automatically equivalent. Confirm project certification and inspection documents before ordering.
