Excerpt:
HEB is a European wide-flange series, specified here in S355JR hot rolled steel. Compare for beams, columns and typical connections. HEA, HEB and HEM with the same nominal designation differ in actual depth, flanges and mass.
QIDA METAL · PRODUCT PROCUREMENT GUIDE
HEB European Wide Flange H Section
HEB is a European wide-flange series, specified here in S355JR hot rolled steel. Compare for beams, columns and typical connections. HEA, HEB and HEM with the same nominal designation differ in actual depth, flanges and mass.
| Procurement Item | Details |
|---|---|
| Applicable Standard | EN 10025-2:2019 / S355JR (hot rolled sections) |
| Product Category | Steel Sections & Bars / H Sections |
| Dimensions & Quantity | The sizes below are enquiry references. Available combinations, quantities and delivery times are subject to written quotation. |
| Documentation | Specify heat/batch inspection documents, standard edition, traceability and project certification in your enquiry. Documents are subject to confirmation of actual availability. |
01 / Product Features & Selection
- Specify HEB designation, grade and length separately for direct schedule checking.
- Standard wide flanges suit common beam-column layouts. Confirm holes and connection dimensions against drawings.
- Distinguish nominal size from actual h×b×tw×tf and theoretical kg/m to prevent section mismatches.
02 / Specifications, Dimensions & Ordering Options
These dimensions help define your purchase requirement; they do not imply that every combination is in stock. Specify tolerances, quantity, delivery condition and destination port. Submit drawings for special sizes.
| Parameter | Specification / Enquiry Range | Points to Confirm |
|---|---|---|
| Nominal Designation Series | HEB 100, 120, 140, 160, 180, 200, 220, 240, 260, 280, 300, 320, 340, 360, 400, 450, 500, 550, 600, 650, 700, 800, 900, 1000 | Full-series geometry and theoretical masses below; confirm actual availability separately. |
| Dimensional Standard | EN 10365:2017 | h = actual depth; b = flange width; tw = web thickness; tf = flange thickness |
| Dimensional / Shape Tolerances | EN 10034 | Check length, flange parallelism, web eccentricity, bending and twist separately. |
| Length / m | 6, 9, 12 or project fixed lengths | Assess long members against container, lifting and site-splicing requirements. |
| Surface & Processing | Hot rolled black steel; cutting, sawing, drilling and corrosion protection by enquiry | Agree acceptance separately for raw sections and fabricated components. |
HEB 100–1000 Section Dimensions
Dimensions in mm; theoretical mass in kg/m. The table covers the stated nominal series and does not imply stock availability. Actual depth may differ from the designation. Use the original section catalogue and project design for inertia, modulus and stability calculations.
| Designation | Actual Depth h | Flange Width b | Web Thickness tw | Flange Thickness tf | Theoretical kg/m |
|---|---|---|---|---|---|
| HEB 100 | 100 | 100 | 6 | 10 | 20.4 |
| HEB 120 | 120 | 120 | 6.5 | 11 | 26.7 |
| HEB 140 | 140 | 140 | 7 | 12 | 33.7 |
| HEB 160 | 160 | 160 | 8 | 13 | 42.6 |
| HEB 180 | 180 | 180 | 8.5 | 14 | 51.2 |
| HEB 200 | 200 | 200 | 9 | 15 | 61.3 |
| HEB 220 | 220 | 220 | 9.5 | 16 | 71.5 |
| HEB 240 | 240 | 240 | 10 | 17 | 83.2 |
| HEB 260 | 260 | 260 | 10 | 17.5 | 93 |
| HEB 280 | 280 | 280 | 10.5 | 18 | 103 |
| HEB 300 | 300 | 300 | 11 | 19 | 117 |
| HEB 320 | 320 | 300 | 11.5 | 20.5 | 127 |
| HEB 340 | 340 | 300 | 12 | 21.5 | 134 |
| HEB 360 | 360 | 300 | 12.5 | 22.5 | 142 |
| HEB 400 | 400 | 300 | 13.5 | 24 | 155 |
| HEB 450 | 450 | 300 | 14 | 26 | 171 |
| HEB 500 | 500 | 300 | 14.5 | 28 | 187 |
| HEB 550 | 550 | 300 | 15 | 29 | 199 |
| HEB 600 | 600 | 300 | 15.5 | 30 | 212 |
| HEB 650 | 650 | 300 | 16 | 31 | 225 |
| HEB 700 | 700 | 300 | 17 | 32 | 241 |
| HEB 800 | 800 | 300 | 17.5 | 33 | 262 |
| HEB 900 | 900 | 300 | 18.5 | 35 | 291 |
| HEB 1000 | 1000 | 300 | 19 | 36 | 314 |
03 / Standard Chemical Composition
EN 10025-2:2019 / S355JR (hot rolled sections). Values are mass percentages (%). Maximum limits are shown by ≤, minimum limits by ≥; ranges are specification limits and Fe is the balance. These are not measured results for a current delivery heat.
| Element / Indicator | Requirement or Range |
|---|---|
| C | ≤0.24 |
| Si | ≤0.55 |
| Mn | ≤1.60 |
| P | ≤0.040 |
| S | ≤0.040 |
| N | ≤0.012 |
| Cu | ≤0.55 |
| CEV | ≤0.45（t≤30 mm）；≤0.47（30<t≤140 mm） |
| Fe | Balance |
From the ArcelorMittal EN 10025-2:2019 hot rolled section table. Heat analysis, mass %. Nitrogen-binding exceptions and special galvanizing chemistry follow the standard. Do not interchange this section table with another edition / product form used for plate.
04 / Mechanical Properties & Application Limits
| Thickness / Material Condition | Yield Strength Re / Rp0.2 (MPa) | Tensile Strength Rm (MPa) | Elongation After Fracture A (%) |
|---|---|---|---|
| 3≤t≤16 mm | ≥355 | 470–630 | ≥22 |
| 16<t≤40 mm | ≥345 | 470–630 | ≥22 |
| 40<t≤63 mm | ≥335 | 470–630 | ≥21 |
| 63<t≤80 mm | ≥325 | 470–630 | ≥20 |
| 80<t≤100 mm | ≥315 | 470–630 | ≥20 |
| 100<t≤140 mm | ≥295 | 450–600 | ≥18 |
Strength in MPa, proportional elongation A in %. Nominal-thickness groups follow public section data. Reference JR impact 27 J / +20°C; sampling and exemptions follow the standard. Structural design determines member, stability and connection capacities.
05 / Inspection, Processing & Quality Checks
- Check EN 10025-2:2019 grade, nominal thickness, delivery condition and heat/batch documents.
- Measure h, b, tw, tf and cut length; check flange slope, web eccentricity, straightness and twist.
- Determine welding procedures from CEV, thickness and restraint. Agree through-thickness properties, UT and actual impact testing before ordering where required.
- Distinguish hot rolled HE sections from fabricated welded H beams; similar appearance does not establish equivalence.
06 / Export Packaging for This Product
| Stage | Recommended Arrangement | Key Considerations |
|---|---|---|
| Section-Separated Bundles | Identify section designation, steel grade, length and heat number separately. | Keep different grades and delivery conditions in separate bundles. |
| Supports & Corner Protection | Protect flanges, leg edges and machined faces; support long sections at multiple points. | Prevent handling twist, local damage and permanent bending. |
| Loading Checks | Plan loading around cut length, bundle weight, forklift points and container-door clearance. | Assess container type and handling arrangements in advance for long or heavy loads. |
Before shipment, cross-check product, grade, heat number, size, piece count, net weight and gross weight against the packing list. Match labels to inspection documents. For solid-wood pallets, dunnage or crates, check destination-country rules; wood subject to ISPM 15 must be treated and marked by an approved provider. Load dry cargo and arrange supports, blocking and securing according to weight and centre of gravity.
07 / How Qida Supports Your Procurement
| Procurement Stage | Qida Coordination | Information for the Buyer |
|---|---|---|
| Requirement Review | Review application, standards, material condition, drawings and acceptance items. | A checkable specification list helps reduce language and unit-conversion errors. |
| Order Confirmation | Confirm material, processing, inspection, packaging, delivery milestones and cost responsibilities item by item. | A clear written quotation and mutually agreed purchase requirements. |
| Delivery Coordination | Coordinate production / sourcing progress, labels, packing lists and shipping documents. | Check dimensions, quantities and heat/batch correspondence at agreed milestones. |
| After-Sales Follow-Up | Review issues using order number, heat number, arrival photographs and test records. | A defined issue description and documented resolution communications. |
Qida focuses on clear specifications, material requirement checks and delivery coordination. Include cutting, cut-to-length, surface treatment, third-party inspection and certificate requirements in your enquiry so that the achievable scope can be agreed before order placement.
08 / Request for Quotation
For an accurate quotation, please provide:
HEB designation + S355JR / standard edition + length / pieces + delivery condition + tolerances + fabrication drawings / inspection documents + destination port. Include project specifications and inspection plans.
Define Specifications, Quality and Delivery in One Enquiry
Send your purchasing list to Shandong Qida Metal Technology Co., Ltd. We will review standards, dimensions and destination requirements with you.
Send an Enquiry · qidamt@163.com
139-6951-8618
Technical Sources & Ordering Notes
This selection and enquiry guide is compiled from the primary public sources below. Values are not an inspection certificate for a delivery batch and do not imply a supply or authorization relationship with the source publishers. The agreed order governs standard edition, product form, thickness range, specimen and delivery condition. Similar grades are not automatically equivalent. Confirm project certification and inspection documents before ordering.
